Installing An I/O Daughter Card - Fujitsu Primergy BX630 S2 Options Manual

Optional I/O module
7.1

Installing an I/O daughter card

V
CAUTION!
Please observe the safety information in the chapter "Safety instruc-
tions" on
Ê Remove the server blade from the basic unit and open it as described in the
chapter "Preparation" on page
Figure 24: Position for an I/O daughter card
Ê Place the I/O daughter card onto the two sockets (A).
Ê Fasten the I/O daughter card with three screws. The corresponding nuts on
the system board are indicated by arrows in
BX630 S2
page 15
19.
Options Guide
Installing an I/O daughter card
A
figure 24.
41