Safety Instructions - Fujitsu Primergy BX630 S2 Options Manual

3

Safety instructions

I
The following safety instructions are also provided in the manual "Safety
notes and other important information".
This device meets the relevant safety regulations for IT equipment. If you have
any questions about whether you can install the server in the intended
environment, please contact your sales outlet or our customer service team.
V
CAUTION!
The actions described in this manual should only be performed by
technical specialists.
Equipment repairs should only be performed by service staff.
Any failure to observe the guidelines in this manual, and any unautho-
rized opening or improper repairs could expose the user to risks
(electric shock, energy hazards, fire hazards) or damage the
equipment.
Please note that any unauthorized opening of the server will void the
warranty and exempt the manufacturer from all liability.
Before starting up
V
CAUTION!
During installation and before operating the device, observe the
instructions on environmental conditions for your device.
If the device is brought in from a cold environment, condensation may
form both inside and on the outside of the device.
Wait until the device has acclimatized to room temperature and is
absolutely dry before starting it up. Material damage may be caused
to the device if this requirement is not observed.
Transport the device only in the original packaging or in packaging
that protects it from knocks and jolts.
Installation and Operation
V
CAUTION!
Read the notes on installation and operation in the operating manual
for your BX600 S2 or BX600 S3 basic unit.
BX630 S2
Options Guide 15