Replacing Memory Modules - Fujitsu Primergy BX630 S2 Options Manual

Replacing memory modules

6.2 Replacing memory modules
V
CAUTION!
Note the safety instructions and the information on handling electro-
statically sensitive devices on
Install the memory modules very carefully. Too much pressure can
damage the ejection tabs.
Ê Remove the server blade from the basic unit and open it as described in the
chapter "Preparation" on page
1
Figure 19: Removing a memory module
Ê Fold the tabs outwards on both sides of the relevant slot (1).
Ê If a memory module was already installed in the slot: Remove the memory
module from the slot (2).
34
page 18.
19.
2
Options Guide
Memory
1
BX630 S2