Fujitsu Primergy BX630 S2 Options Manual page 52

Assembly instructions
Closing the master module
A
Figure 38: Closing the master module
Ê Turn the slave module over so that the housing cover of the master module
and the guide elements face down. Carefully place the slave module onto
the housing of the master module such that it projects 1-2 cm at the back.
Make sure that the slave module lies flush with both sides of the master
module.
Ê Push the slave module in the direction of the arrow as far as it will go.
Ê Fasten the two green knurled screws (A).
52
Upgrading to a quad-socket server blade
Options Guide
BX630 S2