Table of Contents
Advertisement
"Riding Mode" function (riding style
E
change)
This function changes the motorcycle riding style.
Each riding style is associated with a different intervention
level of the traction control (DTC - Ducati Traction Control)
and different engine power and output.
Each riding style change is also associated with a different
motorcycle setup.
To change the motorcycle riding style, press the reset button
once (14, fig. 5) and the "SET UP" menu will appear on the
circular display (B, fig. 7).
The desired riding style can be selected by pressing the
same reset button multiple times (14, fig. 5). Press the same
button for 3 seconds to confirm the riding style.
If the throttle grip is closed (vehicle stopped) the riding style
change will occur immediately; if the throttle grip is open
(vehicle moving) the message "CLOSE THROTTLE TO
ACTIVATE" will appear on the display, which means that the
throttle must be closed; this message will appear for 5
seconds, during which the gas must be closed in order to
activate the new riding style.
If the throttle grip is not closed after 5 seconds, the
procedure is aborted (no change is made).
If the "SET UP" menu is activated and the rest button is not
pressed (14, fig. 5) for 10 consecutive seconds, the
instrument panel will automatically exit the display mode
without making any change.
44
Warning
Ducati recommends changing the riding style when
the vehicle is stopped. If the riding style is changed while
riding, be very careful (it is recommended to change the
riding style at a low speed).
Advertisement
Table of Contents
