Exhaust System; Colour Schemes; Electric System - Ducati Multistradia 1200S ABS Touring Owner's Manual

Multistradia 1200s abs touring
Table of Contents

Advertisement

Exhaust system

Equipped with catalytic converter in compliance with Euro 3
emission regulations.
One-piece stainless steel silencer with aluminium terminals.
Catalytic converter built into the silencer and lambda sensors
on the exhaust pipes at the head output.

Colour schemes

Ducati Anniversary red 473.101 (PPG);
Clear lacquer part no. 228.880 (PPG);
Racing Gray frame and black wheel rims.
Pearl white, code L2909004 (LECHLER);
Enamel code L2920057 (LECHLER);
Clear lacquer code 228.880 (PPG);
Racing Gray frame and black wheel rims.
Black diamond code 57E22714 (AKZO);
Enamel code 54M22705 (AKZO);
Clear lacquer code 228.880 (PPG);
Racing Gray frame and black wheel rims.

Electric system

Basic electric items are:
Headlight:
low beam bulb type: 2 x H11 (12V-55W);
high beam bulb type: 2xH11 (12V-55W);
Parking light: led bulb (13.5V-4W).
Electrical controls on handlebars.
Turn indicators:
Front:LED (9.8 V - 2.2 W);
Rear: halogen bulb type RY10W amber (12V-10W).
Horn.
Brake light switches.
Sealed battery, 12V-10 A.
GENERATOR 12V-500W.
ELECTRONIC RECTIFIER, protected by a 30A fuse located
on the solenoid starter, behind the battery (2, fig. 194).
Starter motor: 12V-0.7 kW.
Tail light and brake signal:
led (13.5 V- 4.2 W/1.5 W)
Number plate light: bulb type C5W (12-5W).
Note
See "Replacing the high and low beam bulbs" on page
162 for relevant instructions.
E
185

Advertisement

Table of Contents
loading

This manual is also suitable for:

Multistrada 1200s abs touring

Table of Contents