Indicator "AVG" - Average speed
E
This function shows the average speed of the motorcycle.
The calculation is made considering the distance and time
travelled since the last Trip 1 reset. When Trip 1 is reset, the
value is set to zero and the first available value is shown on
the display 10 seconds after the reset. Dashes "- -.-" are
shown on the display during the first 10 seconds when the
value is not yet available.
The active calculation phase only occurs when the engine is
running and the vehicle is moving (moments when the
vehicle is not moving when speed is equal to 0 and/or when
the engine is off are not considered).
The calculated value is displayed increased by 8% to align it
with the vehicle indicated speed.
Air temperature indicator
This function shows the external temperature.
Display limits: -39°C ÷ +124°C
In the event of a sensor FAULT (-40°C,+125°C or
disconnected), a string of dashes "- - -" (not flashing) is
displayed and the "Engine/Vehicle Diagnosis - EOBD" light
(8, fig. 4) comes on and an error is indicated inside "Errors"
Menu.
Note
When the vehicle is stopped, the engine heat could
influence the displayed temperature.
42
vs. EU, CND, FRA, JAP
vs. EU, CND, FRA, JAP
UK, USA versions
fig. 33
UK, USA versions
fig. 34