Table of Contents
Advertisement
Checking brake pads for wear
E
To facilitate inspection without removing the pads from the
callipers, brake pads have a wear mark. If the grooves in the
pad friction material are still visible, the pad is still in good
condition.
The pads must be replaced when approx. 1 mm of friction
material (fig. 167 and fig. 168) can be seen through the
opening between the callipers.
Important
Have the brake pads replaced at a Ducati Dealer or
authorised Service Centre.
156
MIN
1 mm
fig. 167
fig. 168
Advertisement
Table of Contents
