If the code was entered correctly the message "NEW PIN"
and four dashes "- - - -" will appear on the circular display;
E
now enter the "new" 4 digit code.
Entering the "new" PIN: each time you press the button (2,
fig. 8) "▼" the displayed number increases from "0" to "9"
and then returns to "0";
to confirm the number, press the reset button (14, fig. 5).
repeat the procedure until inserting the fourth digit;
Press the reset button (14, fig. 5) again to confirm.
"OK" and "EXIT" will appear on the display.
To confirm the PIN that was entered, press the reset button
(14, fig. 5) again showing "OK".
"NEW PIN MEM" will appear on the display for 3 seconds to
confirm that the PIN was stored.
At the end of the 3 seconds, the instrument panel exits
automatically from the display and returns to the "setting"
menu.
The PIN CODE modification procedure is complete.
Note
There is no limit to the amount of times you can
change your PIN CODE.
98