Operation - ADJ INNO POCKET ROLL User Instructions

Inno Pocket Roll
To enter the offset adjustment submenu, press the ENTER button for
at least 5 seconds. In this submenu you are able to adjust the pan
home position and gobo wheel position.
PAN
- Adjustment of the pan position.
1. Press the ENTER button for at least 5 seconds, then press the UP
or DOWN buttons so that "PAN" is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and
then press ENTER to confirm. Press the MENU button for one second
to exit.
GOBO
- Adjustment of the gobo position.
1. Press the ENTER button for at least 5 seconds, then press the UP
or DOWN buttons so that "GOBO" is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and
then press ENTER to confirm. Press the MENU button for one second
to exit.
ADJ Products, LLC - www.adj.com - Inno Pocket Roll Instruction Manual Page 14
Offset Adjustment Menu Inno Pocket Roll
Operating Modes: The Inno Pocket Roll can operate in three
different modes. In each mode you can run the fixture as a
stand alone fixture or in a master/slave confiugration. This next
section will detail the differences in the operating modes.
• Sound Active mode -
The fixture will react to sound, chasing through the built-in programs.
• Show mode -
The fixture will run one of 12 shows.
• DMX control mode -
This function will allow you to control each individual fixtures traits
with a standard DMX-512 controller.
Universal DMX Control:
universal DMX-512 controller to control the chases and patterns,
dimmer and strobe. A DMX controller allows you to create unique
programs tailored to your individual needs.
1. The Inno Pocket Roll has 6 DMX Channels. See pages 17-18 for
detailed description of the DMX values and traits.
2. To control your fixture in DMX mode, follow the set-up procedures
on pages 5-7 as well as the set-up specifications that are includ-
ed with your DMX controller.
3. Use your DMX controller's faders to control the various DMX fix-
ture traits.
4. Follow the instructions on page 9 to set the DMX address.
5. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
6. For help operating in DMX mode consult the manual included
with your DMX controller.
Sound Active Mode:
This mode allows either a single unit or several
units linked together, to run to the beat of the music.
1. Press the MENU button until "SOUN" is displayed, and press
ENTER. Press the UP or DOWN buttons so that "ON" is dis-
played and press ENTER.
2. To adjust the sound sensitivity level press the MENU button until
"SENS" is displayed, and press ENTER. Use the UP or DOWN
buttons to adjust the sensitivity level, "0" being least sensitive,
"100" being the most sensitive. Press ENTER to set your level.
ADJ Products, LLC - www.adj.com - Inno Pocket Roll Instruction Manual Page 15
This function allows you to use a Elation

Operation

®