Table of Contents
Advertisement
Power
Accessory
Compartment
To fit through smaller than standard doors, the console can be
reduced in height by partial disassembly. Refer to "Removing and
Replacing the IRP 4500 Screen" on page 32.
A computer to be used with the IRP 4500 must not be more than 10"
(254 mm) wide by 20" (508 mm) high by 20" (508 mm) deep; a tower
case is preferred.
IRP 4100 SPATIAL REQUIREMENTS
IRP 4100 is a wall or cabinet mounted rear projection screen that
includes a metal frame fitted with cabling and an IR receiver for the
electronic pen.
OVERVIEW
Screen
PC
Compartment
Center Panel
5
Advertisement
Table of Contents
Troubleshooting
