the assembly on either side of the console, but the left side is
usually recommended.
3
Fasten the carriage and arm assembly to the console with the
two cap screws and tighten with the 5/32" allen wrench.
4
Slip the keyboard tray and pedestal assembly into the carriage
and arm assembly.
5
Place the keyboard mouse pad on the tray.
6
Make sure the tray moves easily in its various directions. Adjust
the tension in the two pivot points, as desired, using the 3/16"
allen wrench.
INSTALLING OPTIONAL MAGNETIC PEN HOLDER
The optional magnetic pen holder can be placed on any metal
surface of the console and moved at any time.
Store projector remote
Store pen spare battery
Store electronic pen
ASSEMBLING THE OPTIONAL VIDEO CAMERA PEDESTAL
Your video camera pedestal comes packaged in a separate carton.
The tools required to assemble the video camera pedestal are listed
on the video camera pedestal kit packing list and are located in the
IRP 4500 toolkit envelope shipped inside the accessory
compartment (left-rear) of the console.
INSTALLING THE IRP 4500
13