Installing the IRP 4500
Read through this entire section regarding installation before
actually beginning work. The IRP 4500 is a combination of high
precision mechanical, optical, and electronic components. Although
the installation needs to be done carefully, it can be handled by
most people who can follow detailed directions and have
mechanical assembly skills. However, knowing exactly what to
expect and all the steps involved will save you time and reduce the
chances of making needless mistakes.
Components
The IRP 4500 system includes:
•
Rear-projection console with customized projector mounting
platform and laser-scanned, electronic writing surface
•
Three- pronged IEC power cable, type SJT
•
Serial cable for computer connection
•
Webster User Guide
•
Webster CD-ROM
•
Calibration kit
•
Batteries (spare for electronic pen)
•
Electronic pen with battery
•
VGA cable
•
Installation and maintenance toolkit
•
(Optional) Pedestal for mounting a user supplied miniature CCD
video camera on the side of the console
•
(Optional) Magnetic pen holder to hold electronic pen, spare
battery, and projector remote control
•
(Optional) Keyboard/mouse tray kit
REMOVAL FROM SHIPPING PALLET
A separate document titled Information for Unpacking and
Installation comes on the outside of the IRP 4500 packaging when it
is on the shipping pallet. Refer to that document to remove the unit
and other cartons from the pallet and to place them where you will
continue with the installation.
10
INSTALLING THE IRP 4500