Webster IRP 4100 Installation Manual page 14

The tools required to assemble the keyboard tray are listed on the
Keyboard tray kit packing list and are located in the IRP 4500 toolkit
envelope shipped inside the accessory compartment on the left front
of the console.
Use the keyboard tray kit packing list and accompanying assembly
diagram to identify the parts of the keyboard tray assembly.
To assemble and install the keyboard/mouse tray:
Mount carriage assembly
to frame with two 10-32
screws provided.
Adjust tray tension here with 3/16"
1 Using the 5/32" allen wrench (provided), remove the two
shipping restraining bars, one on each side of the console. Keep
these bars and screws with your pallet and packing materials if
the unit will need to be reshipped.
2 Note the general arrangement and orientation of the kit parts
and determine which set of holes on the side of the console to
use for mounting the carriage and arm assembly. You can mount
12
Allen wrench provided in tool kit.
Insert tray assembly into
carriage assembly as shown.
INSTALLING THE IRP 4500