Connecting The Power Cord - Magicard Prima 2e Instruction Manual

Set-up
(continued)

Connecting the power cord

1.
Check the plug.
• For AC 120V type
(North America)
* The detached power cords vary according to model
and country of purchase.
2.
Plug the power cable into the printer.
Plug the power cable of the laminator if it is installed.
CAUTION
Always use a grounded power outlet.
Never share the outlet with other electrical equipment.
Use an AVR (Automatic Voltage Regulator) if there
is a possibility of voltage fluctuation. Use an
uninterruptible power source rather than an AVR if
there is the possibility of uninterruptible power
source.
• For AC220-240V type
(Europe)
13