Troubleshooting; Layout Of Rollers Inside The Printer - Magicard Prima 2e Instruction Manual

Troubleshooting

Layout of rollers inside the printer

Below is a diagram of the layout of rollers inside the printer. Refer to this diagram in the event of card jams and
when cleaning the rollers.
Retransfer film cassette
Retransfer roller (heat roller)
Bend remedial roller (heat roller)
All rollers require routine cleaning.
• The card feed rollers, retransfer roller and
bend remedial roller can be cleaned on
cleaning mode.
(See p.38, 39 in this manual.)
• The cleaning roller can be cleaned by water
washing.
(See p.36 in this manual.)
Ink ribbon cassette
Card jams
(see p. 46)
J a m ( T r a n s f e r )
How to clean the feed roller
1.
Open the card tray, and take out the cards from the
tray.
2.
Move the card bracket until it locks.
3.
Clean the feed roller with felt (sold separately)
soaked with absolute alcohol(ethanol).
Thermal head
Magnetic head
Card turnover table
Card feed rollers
Card jams
(see p.46)
J a m ( T u r n O v e r )
Cleaning rollers
Card feed rollers
Card jams
(see p.45)
J a m ( H o p p e r )
Feed roller
41