Connecting With A Host Computer; Connecting Multiple Printers - Magicard Prima 2e Instruction Manual

Set-up
(continued)

Connecting with a host computer

CAUTION
Do not switch off the power of the
host computer during printing.
Do not use the sleep or the stand-by function on the host
computer.
If the power of the host computer is switched off during printing,
or if the sleep or the stand-by function of the host computer is
activated, the printer may stop with cards printed halfway remain
in the printer. When this occurs, initialize the priner as "Slopping
when printing"of page 44 on this manual.
1.
Check to ensure that the power of both the printer
and host computer are switched off.
2.
Connect the printer and host computer with the USB
cable.
Insert the USB cable to the USB cable connection terminal
at the back of the printer.
USB cable
(Accessories)
CAUTION
Adjust orientation of the USB cable
according to the terminal, and insert it all the way in.
CAUTION
Consult your dealer on the cable
connection if there are USB or serial cable connection
terminal on the printer's optional port.
CAUTION
The location of terminals varies with the host computer.
Please refer to the instruction manual of the host
computer.
When there are multiple USB cable comection terminal
on the host computer, either one can be used.
Do not connect to the USB comection terminal on the
host computer's monitor or keyboard. It may not be
recognized correctly.
When using a USB hub, connect to the hub that is directly
linked to the host computer.
22

Connecting Multiple Printers

When connecting a host computer to multiple printers,
set different Unit Numbers from 1 to 7 for each printer.
Refer to see the page 35 of the instruction manual