Figure 3-7 Securing The Hardmount Bracket To The Server - Sun Microsystems Netra T2000 Installation Manual

Sliding Rail 19-inch 4-Post Rackmount Screw Kit Contents (Continued)
TABLE 3-3
Number Description
10 10–32 collar screws 4 short, 4 long, 2 extra
12 10-32 x 0.5 in. combo head screws
12 12-24 x 0.5 in. combo head screws
1. Get the hardmount brackets and M5 × 8 mm flathead Phillips screws from the
standard rack kit (
These hardmount brackets and screws are shipped with the standard server ship kit,
not as part of the sliding rail 19-inch 4-post rackmount ship kit.
2. Use four of the supplied M5 × 8 mm flathead Phillips screws to secure each of the
hardmount brackets to the sides of the server (
FIGURE 3-7
3. Get the Telco slide assemblies from the rack kit (
4. Press in the button on each slide and pull the glide completely out of the slide
(
FIGURE 3-8
28 Netra T2000 Server Installation Guide • September 2006
).
FIGURE 3-1
Securing the Hardmount Bracket to the Server
).
Where Used
8 for racks with 10-32 holes, if appropriate
12 for rack, if appropriate
12 for rack, if appropriate
).
FIGURE 3-7
FIGURE 3-6
).