4
C H A P T E R
Mounting the Server Into a 2-Post
Rack
This chapter provides instructions for installing the server in an open 2-post rack.
This chapter contains the following sections:
"2-Post Rackmounting Options" on page 56
■
"Hardmounting the Server in a 23-Inch 2-Post Rack" on page 56
■
"Hardmounting the Server in a 19-Inch 2-Post Rack" on page 61
■
Note – References to left and right are from your viewpoint as you face either the
front or rear of the equipment.
Caution – The server is heavy. Two people are required to lift and mount the server
into a rack enclosure when following the procedures in this chapter.
55
Need help?
Do you have a question about the Netra T2000 and is the answer not in the manual?