Table of Contents
Advertisement
(3) Mechanical Inspection
Make sure all exposed screws are tight.
Make sure all models and connector are in proper positions.
Check the external cables for splits; cracks or signs of twisting replace any cable that shows
serious damage.
WARNING: Failure on the part of the responsible individual hospital or institution
employing the use of this equipment to implement a satisfactory maintenance schedule may
cause undue equipment failure and possible health hazards.
6.2 Care and Cleaning of Monitor
Keep the exterior surface of the monitor clean and free of dirt.
Regular cleaning of the monitor casing and the screen is strongly recommended. Use only non-
caustic detergents such as soap and water to clean the monitor casing.
Take extra care when cleaning the display surface. These are more sensitive to rough handling,
scratches and breakage than the other external surface of the monitor. Use dry, and soft cloth to
wipe.
WARNING: Unplug the monitor from the AC power source and detach all accessories before
cleaning. Do not immerse the unit in water or allow liquids to enter the casing.
CAUTION:
1
Many cleaners must be diluted before use. Follow the manufacturer's direction carefully to
avoid damaging the monitor.
2
Do not use strong solvent, for example, acetone.
3
Do not remain any cleaning solution on the surface of the monitor.
4
The monitor surface can be cleaned with hospital-grade ethanol and dried in air or with crisp
and clean cloth.
5
The manufacturer has no responsibility for the effectiveness of controlling infectious disease
using these chemical agents. Please contact infectious disease experts in your hospital for
details.
6.3 Care and Cleaning of Transducer
（1 （ Maintenance
Usually, the transducer should keep clean and maintain in dry environment, where the temperature
should be lower than 45 degrees. Gel must be wiped from the ultrasound transducer after use.
These precautions will prolong the life of the transducer.
Hide quick links:
Advertisement
Table of Contents
