Contec CMS800G User Manual page 15

Revolving the knob key to setup alarm function. The Corresponding function and the adjustable
ranges are showed in the table3.2:
Table 3.2 The alarm setup function and adjustable ranges
No
1 FHR ALM(FHR Alarm)
2 ALM HIGH(FHR Upper Limit of
Alarm)
3 ALM LOW(FHR Lower Limit of
Alarm)
4 ALM DELAY(FHR Alarm Delay)
Note:
1 When FHR is in alarm situation, alarm indicator becomes red
2
When FHR exceeds the alarm limit and time exceed the set alarm delay time
continuously, alarm will occur and an alarm symbol will appear on the screen.
（2（Patient Setup
Revolving the knob key to enter patient setup, the diagram is showed as Figure 3.7:
Revolving the knob key to setup patient function. The Corresponding function and the adjustable
ranges are showed in the table3.3:
Table 3.3 the patient setup function and adjustable ranges
No
1 NAME(Name)
2 AGE(Age)
3 BED NO.(Bed No.)
4 PAT NO.(Case History No.)
Figure 3.6 Alarm Setup
Function
Figure 3.7 Patient Setup
Function
Adjustable Range
Optional: Turn on, shut off The default situation
is alarm on.
Optional: lower limit of alarm-310, the unit is
BPM, and the default is 190
Optional: high limit of alarm 0④FHR, the unit is
BPM, and the default is 110
Optional:0④60,the unit is second, and the default
is 30 seconds
Adjustable Ranges
Optional: 12 letter or numeral. The default is blank
Optional: numeral from 1-100. The default is 25
Optional: numeral from 1-100. The default is 1
Optional: 12 letter or numeral. The default is blank