Contec CMS800G User Manual page 10

status④alarm on /off; It displays FHR 1 from Ultrasound Transducer I ④FHR 2 from Ultrasound
Transducer II (Twins monitoring) and TOCO④ Fetal Movement data; parameter section displays the
important parameter of current settings; time④bed number④time of pregnancy and age of pregnant
woman are displayed in indicate bar; waves from ultrasound transducer I channel ④ ultrasound
transducer II channel(Twins Monitoring) and TOCO transducer are displayed in wave display
section. Detail instruction as followed.
（1（Status Bar
④A④Sound channel and volume
Icon ④ Ⅰ:3
④Sound Icon
④Sound off Icon
I④The No. of FHR sound channel, it is I under single fetal monitoring mode which is
default; I④II selectable under twins monitoring mode, it can be changed through
the main menu.
3④Volume level, ranging from 0-7, 0 stands for sound off. It can be changed through the
buttons on the panel or set in the main menu.
④B④Connection status of ultrasound transducer
Icon Ⅰ
④ :
I④Channel No. of ultrasound transducer, there is only I under single monitoring mode,
there are I and II under twins monitoring mode
④Normal connection of ultrasound transducer
④Error connection of ultrasound transducer
④C④Connection Status of TOCO transducer
④Normal connection of TOCO transducer
④Error connection of TOCO transducer
④D④Freeze status
④Shows current screen is frozen; icon will disappear when unfrozen.
④E④Recorder status
④Printing
④out of paper
④Failed to print
Ⅰ:0
: Ⅱ