Care Of Recorder And Paper; Cleaning Of Belt; Sterilization - Contec CMS800G User Manual

Although transducers are designed for durability, they should be handled with care. Rough
handling could damage the cover, piezoelectric crystals and mechanical movement. The cover is
made of a soft plastic, and contact with hard or sharp objects should be avoided. Do not
excessively flex the cables.
WARNING: Under no circumstance are transducers to be used to monitor patients under
water.
CAUTION: Be sure that the cleaning solution and transducers do not exceed a temperature
of 45 degrees.
（2（Cleaning of Ultrasound Transducer, TOCO Transducer and Remote Marker.
1
Wipe the transducer with a cloth.
2
Clean the transducer with a cloth soaked in a solution of soap and water, or a cleaning
solution.
Do not immerse the transducer in the solution. Or a cloth soaked in a solution of 70%
ethanol to clean the transducer. When using a cleaning solution, follow the manufacturer's
directions carefully to avoid damaging the transducer.
3
Wipe the transducer with a cloth soaked in water.
4
Wipe the remained humidity with clean and dried cloth.

6.4 Care of Recorder and Paper

Note: Please do not use paper not recommended by CONTEC or we will not warrant to
repair if any damage occurs.
When storing recorder paper (including used paper with traces):
Do not store in plastic envelopes.
Do not leave exposed to direct sunlight or ultraviolet light.
Do not exceed a storage temperature of 40
Do not exceed a humidity of 80%.
Storage conditions outside these limits may distort the paper and adversely affect the accuracy of
grid lines or make the trace unreadable.

6.5 Cleaning of Belt

Wash soiled belts with soap and water. The water temperature must not exceed 60

6.6 Sterilization

To avoid extended damage to the equipment, sterilization is only recommended when stipulated as
necessary in the hospital maintenance schedule. Sterilization facilities should be cleaned first.
0 C.
0 C.