Setting Auto Diaier Memories; Starting The Data Editor For The Ej-39D (Trunking Mode) - Alinco DR-135 Dealer's Manual

Time out timer:
Time out penalty:
Key Lock:
APO:
Beep sound:
Scanning Mode:
Lamp Mode:
Security Mode:

3.5 Setting Auto DiaIer Memories

To program the dialer memories, 1) on the main menu, press the F3 key, 2)
select the "Auto Dialer (A)" option and press the Enter key to open the "Edit
auto dialer" window, 3) select the desired memory number, and enter a
numeric value (up to 16 digits), 4) press the Enter key, 5) when you complete
your settings, press the F4 key to close the window.
3.6 Starting the Data Editor for the EJ-39D
(Trunking Mode)
After installing EJ-39D, the radio becomes in Trunking mode with memory
BANKs.
Program the memory in each BANK as follows:
1.
Install the Data Editor and type as following next to DOS prompt.
or,
The main menu for trunking will appear.
10
Turn the TOT (Time Out Timer) off, or select a transmission time
by pressing the space bar. You can reverse the order of the
options by holding down the Shift key and pressing the space
key. The time out timer starts working when the
pressed. When the timer expires, the transceiver will
automatically shut the transmission off.
Turn the TOT penalty off, or select the penalty time. You can
reverse the order of the options by holding down the Shift key
and pressing the space key. If the timer expires during
transmission, the operator cannot restart the transmission unit
the time you specify in this field elapses.
Activate the key lock or frequency lock to avoid misoperation.
You can also disable Key Lock functions.
Turn the auto-power-off feature on or off.
Set the beep sound ON/Off.
Set SCAN mode (Timer/Busy).
Set the lamp lighting mode (High or Low).
Set the Theft Alarm function ON/Off.
DR135.EXE/TRUNK DR135.EXE/TRUNK
DR135.EXE/TRUNK DR135.EXE/TRUNK
D D D D R R R R 1 1 1 1 3 3 3 3 5 5 5 5 /TRUNK /TRUNK
/TRUNK /TRUNK
key is