Table of Contents
Advertisement
6
KEY OPERATIONS
means transmitting frequency higher than receiving frequency.
4.
When LCD displays "
means transmitting frequency lower than receiving frequency.
5.
Turn
Main Dial or Mic's [
frequency in accordance with the step setting.
6.
Press any key except
Under channel mode,this operation can be temporarily available.
Once the radio is turned off or switched to another channel,the
temporary setting will be erased.
KEYPAD LOCKOUT
15
Avoiding unintentional operation, this function will lock, all keys except
and
.
、
1.
Press
key until LCD displays
icon, then press
displays
icon. Now keypad lockout
function is valid.
2.
Repeat above operation,
lockout function is invalid.
Auto-Dialer Setup
This will automatically transmit pre-programmed and stored DTMF
tones. It is necessary to program Auto-dialer tones in advance to operate
this feature.
" icon, it indicates negative offset, which
/
] key to change offset
and
key to set and finish setting.
key until LCD
icon disappears, indicating keypad
1.
While pressing and holding
the auto-dialer enquiry mode, LCD displays current default data
and current group displayed on left. If no data in current group,it
shows"EMPTY".
2.
Turn selector knob to choose group
you wish to edit. Up to 16 Auto-dialer
memories are available.
3.
Press
key to program the DTMF
you wish to transmit automatically.
4.
The display scrolls when the 7th digit
is entered. The numbers 0-9, --, A-D,
* and # can be stored up to a total of
23 digits.
5.
After editing, press PTT
key to send current auto-dialer tones.
Press
to exit and store.
Transmitting Edited DTMF tones in the Auto-dialer memory
1.
While pressing and holding
auto-dialer enquiry
2.
Turn
Main Dial to select desired auto-dialer group to transmit.
3.
Press PTT to transmit selected DTMF tones.
key, press
key to enter
key, press
key to enter into
Advertisement
Table of Contents
