Hot Key Setting For P1,P2,P3,P4,P5,P6, Pa-Pd; Combination Key Function - Alinco DR-MD520T Instruction Manual

In standby, if the call contact type for a channel is "Single call" ,
press the key programmed as " Channel Ranging" to turn on this
CH Ranging
function. The radio will automatically start ranging function when
turn to this channel.
In standby, press the key programmed as" Max Volume", will
Max VOL Set
enable users to set the maximum RX volume.
Choose Slot for current channel, this function is only valid in
Slot Set
repeater mode.
Aprs Type Choose analog or digital Aprs Type for current channel.
In standby, press the programmed "Zone Select" key, it will allow
Zone Select you input the zone number and then press confirm key will switch
to the zone.
A CH Mute Mute the main channel
B CH Mute Mute the sub channel
Roaming Set Enter into Roaming menu quickly
APRS Set Enter into APRS menu quickly
Zone Up Switch the zone upwardly
Zone Dn Switch the zone downwardly
Exit Exit the menu (only for A-D short press)
Menu Enter into the menu (only for A-D short press)

Hot Key Setting for P1,P2,P3,P4,P5,P6, PA-PD

Enter radio Menu-Settings-Radio Set-P1-P6,PA-PD,sub menu.
Users can choose settings for Hot Keys 1-6.
Hot Key function details must be setup in PC software – Public - Hot key.
Getting Acquainted
Should edit the analog quick call first, then choose analog
Analog in the hot key set. Press the key to transmit 2Tone/5Tone/
DTMF to start the analog quick call.
Call
It allows to select a contact from the digital contact
list, press the key to switch the channel to the contact
Digital
temporary. It will switch back to the original contact after
the group/personal call hold time.
SMS
Quick access to Messages in the menu
New Msg
Quick access to New Msg in the Menu - Messages
Hot Text Quick access to Quick Text in the Menu - Messages
Received
Quick access to Inbox in the Menu - Messages
SMS
Send SMS Quick access to Out box in the Menu - Messages
Contact list Quick access to Contact list in the Menu - Contacts
Manual dial
Quick access to Manual Dial in the Menu - Contacts
Menu
Call Log Quick access to Call Log in the Menu
Dialed Calls
Quick access to Dialed Calls in the Menu - Call Log
Received
Quick access to Answered Calls in the Menu - Call Log
Calls
Missed Calls
Quick access to Missed Calls in the Menu - Call Log
Zone
Quick access to Zone in the Menu
Radio set Quick access to Radio Set in the Menu - Settings

Combination Key Function

[MENU] + number key operation:
Press [MENU] key and hold until the LCD display "Next Please Press
Dial Key", press the number key, it will perform the programmed function.
Combination key function shall be setup in PC software-Public-Hot key.
3
8