Sam4s ER-230 Series Operation And Program Manual page 103

Address PRINT OPTION
23
24
26
25
26
27
28
29
NOTE 1: Print Option# 8 - Users outside of the USA can designate a different currency symbol. To select a
different symbol, type descriptors on the alpha keyboard overlay or enter three digit alpha character codes. To
use three digit alpha character codes you must select 'No' in system option #30 (See "System Option
Programming"). Also see Descriptor Programming Methods for Alpha Overlay and/or Descriptor Code
Table.
NOTE 2: Print Option# 14,15,16,17 - If you are using the currency conversion feature, you can select the
appropriate symbol for each foreign currency you are accepting. To select a different symbol, type descriptors
on the alpha keyboard overlay or enter three digit alpha character codes. To use three digit alpha character
codes you must select 'No' in system option #30 (See "System Option Programming). Also see Descriptor
Programming Methods for Alpha Overlay and/or Descriptor Code Table.
Sam4S ER230 Series Electronic Cash Register AU
Issue a second receipt for the same transaction?
(Buffer receipt issue when receipt printer is on)
(Also see Sys Opt #6)
Priority print by group on the kitchen printer?
Print PLU number on the receipt?
Not print when polling reports?
(Note: this setting is equivalent to 'print when polling
reports – Yes'
Print PLU number on PLU report?
Grand total is:
NOT USED
Send order to the kitchen printer when the SBTL key is
pressed?
Print preamble graphic logo on receipt?
Print preamble graphic logo
Number of Pre-feeding lines (0-5) on receipt
Number of Post-feeding lines (0-5) on receipt
VALUE
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Net sale = 4
Gross sale = 0
Yes = 1
No = 0
Yes = 1
No = 0
Default =
0
User = 1
0
0
Default values have been highlighted in bold print
Program Mode Programming • 99
= SUM