Oki B410 Maintenance Manual page 99

Oki Data CONFIDENTIAL
Error
Status
code
level
nnn
Error 380
Error 381
382
389
Error 372
Error 353
Error 547
Error 343
Error 310
587
Error
Error
Error
Error
Error
43984801TH Rev.1
LCD (16 digits on the upper level and 16 digits on the
lower level)
(" " shows that nothing is displayed on the upper
level.)
Japanese
Open the top cover OPEN UPPER COVER
nnn: paper jam nnn:PAPER JAM
Open the top cover OPEN UPPER COVER
nnn: paper jam nnn:PAPER JAM
Open the rear cover. OPEN REAR COVER
nnn: Paper jam nnn:PAPER JAM
Replace the drum. REPLACE IMAGE DRUM
nnn: Drum Life nnn:DRUM LIFE
Check toner cartridge CHECK TONER
nnn: The position of the CARTRIDGE
lock lever is not correct. nnn:IMPROPER LOCK
LEVER POSITION
Set the drum again. CHECK IMAGE DRUM
nnn: Drum error nnn:DRUM MISSING
Close the cover. CLOSE COVER
nnn: Cover open nnn:COVER OPEN
Wait a moment WAIT A MOMENT
In Receiving data DATA RECEIVE
Wait a moment. WAIT A MOMENT
In processing of received DATA RECEIVED OK
data
Check the data. CHECK DATA
Received data error REC DATA ERROR
<%DLCODE%> <%DLCODE%>
Wait a moment. WAIT A MOMENT
In writing data DATA WRITING
Wait a moment. POWER OFF/ON
In processing of the data DATA WRITTEN OK
writing
Table 6-1 (9/12)
English
Ready
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
6. Procedures for Repairing
LED Contents
Atten
Blinking Paper jams occur while
paper is fed in a paper
path. Open the top cover to
remove a jammed sheet.
Blinking Paper jams occur while
paper is fed in a paper
path. Open the top cover to
remove a jammed sheet.
381: Under the drum
382: Around the fuser unit
383: Place which can not
be identified.
Blinking Paper jams occur around
the duplex unit. Open the
front cover to remove a
jammed paper. Paper in the
near side.
Blinking The duration of the life of
the image drum cartridge.
Replace the image drum
cartridge.
Blinking The toner is not supplied.
Check that the knob of the
toner cartridge is horizontal.
Tap the cartridge.
Blinking The lock of the belt is
released, or the drum
cartridge is not correctly
installed.
Check the lock of the belt
and reinstall the black
image drum cartridge.
Blinking The top cover or the rear
cover is open. Close the
cover.
310: Top cover
587: Rear cover
Blinking In receiving the NIC
program data to be updated.
OFF The reception of NIC
program data to be updated
is completed.
ON It shows that an error occurs
during the processing of
received NIC program data
to be updated.
1: Size error
2: Check SUM error
3: Printer model No. error
4: Module I/F version error
5: FAT Version error
Blinking In writing the NIC program
data to be updated.
OFF It is completed to write the
NIC program data to be
updated.
99 /