Oki B410 Maintenance Manual page 68

Oki Data CONFIDENTIAL
Category
Setting item
(Upper case)
FILE SYS
FLASH
MAINTE1
INITIALIZE
FILE SYS
INITIAL LOCK
MAINTE2
PS MENU
L1 TRAY
SIDM
SIDM MANUAL
MENU
ID#
SIDM MANUAL
2 ID#
SIDM MP TRAY
ID#
SIDM TRAY1 ID# 0
SIDM TRAY2
ID#
LANGUAGE
LANG
MENU
INITIALIZE
43984801TH Rev.1
Operation panel display
Setting item
(Lower case)
EXECUTE
YES
NO
TYPE1
TYPE2
0
~
2
~
9
0
~
3
~
9
0
~
4
~
9
1
~
9
0
~
2
~
5
~
9
EXECUTE
Default
* Only English is supported for panel display
value
- Initialize resident FLASH.
Press Enter switch then the following confirming
message is displayed.
ARE YOU SURE? EXECUTE OR NOT?
YES / NO
If NO is chosen, it returns to the previous menu
display.
If YES is chosen, it reboots automatically and executes
the initialization of Flash Memory.
[Display condition]
"ADMIN MENU"-"FILE SYS MAINTE2"-"INITIAL
LOCK" is NO.
* Do not allow to modify setting accompanied by the
initialization of Block Device (FLASH).
If set this menu to YES, item "ADMIN MENU", "FILE
SYS MAINTE1" is not displayed on the operation
panel.
[Display condition]
"PRINT ACCUMULATING"-"ACCUMULATING
RESULT PRINT" of User Menu is DISABLE.
* As setting TYPE 1, the selecting number of level
1 operator tray is enable from 1, yet it is from 0 as
setting TYPE 2,
Only B430/B440 series is displayed.
*J Set Pn specified by MANUAL in CSF CONTROL
CONMENT OF MANUAL-1 ID No.FX/PPR/ESCP
*E Emu(ESC EM Pn).
Default value: Japan oriented is "0", Except Japan
oriented is "2".
Set Pn specified by MANUAL in CSF CONTROL
CONMENT OF MANUAL-2 ID No.FX/PPR/ESCP
* Emu(ESC EM Pn).
Set Pn specified by TRAYO (mp Tray) in the MP Tray
ID No. FX/PPR Emu (ESC EM Pn).
* Only B430/B440 series is displayed.
Set Pn specified by TRAY 1 in CSF CONTROL
* DEMMAND of Tray 1 ID No. FX/PPR/ESCP Emu (ESC
EM Pn).
Set Pn specified by TRAY 1 in CSF CONTROL
DEMMAND (ESC EM Pn) of Tray 2 ID No.FX/PPR/
*J ESCP Emu.
Default Value: Japan oriented is "2", Except Japan
*E oriented is 5.
[Display condition]
Tray 2 implementation
- Initialize (Delete) LED message file that is loaded on
FLASH.
Press Enter switch then the following message is
displayed.
ARE YOU SURE?
YES / NO
If NO is selected, return to original MENU display.
If YES is selected, immediately remove the MENU and
starts to delete operation after reboot.
Only support Multi-language model.
4. ADJUSTMENT
Function
YES / NO
68 /