Oki Data CONFIDENTIAL
・ Remove Feed-Roller / Clutch.
(8) Press Claw D by the arrow direction an d remove Feed-Roller-NO ❿ .
(9) Remove the 2 of E ring ⑪, Slide Hopping-shaft by the arrow direction and remove Gear-Assy-Clutch ⓬.
(10) Installing is performed by the inverse procedure with removing.
(Note on removing / installing)
1. Beware of not to touch the DC motor inattentively (Do not rotate motor).
43984801TH Rev.1
Plate-Base-Assy
Claw D
Hopping-shaft
⑪
⑪
3. Parts replacement
63 /