Oki B410 Maintenance Manual page 142

Oki Data CONFIDENTIAL
ACK Width
Narrow
Press the "Menu
ACK/ BUSY Timing
ACK IN BUSY *
Press the "Menu
I-PRIME
DISABLE
Press the "Menu
OFFLINE RECEIVE
DISABLE
Press the "Online" key.
Online
43984801TH Rev.1
Items
*
Display
Narrow
Normal
Wide
Default Setting: Narrow
" key.
Items
Display
ACK IN BUSY
ACK WHILE BUSY
Factory Default: ACK IN BUSY
" key.
Items
Display
*
Disable
3 microseconds
50 micro seconds
Factory Default : 50 Micro seconds (B410 series)
Disable (B420/ B430/ B440 series)
" key.
Items
Display
*
Disable
Enable
Factory Default: Disable
*It is displayed only when PSE is installed.
The setting is completed.
Appendix A Centronics Parallel Interface
ACK width at compatible receiving
Function
0.5μs
1.0μs
3.0μs
Output order of BUSY signal and
ACK signal at compatible receiving
BUSY=LOW is at the posterior border of ACK pulse
BUSY=LOW is at the center of ACK pulse
I-PRIME
I-PRIME signal is ignored.
Enable at the I-PRIME signal of 3μs
Enable at the I-PRIME signal of 50μs
Enable/ Disable of Offline Receiving
Function
Disable
Enable
I/F signal does not change and still
keep in signal receivable status
even the alarm sounds.
Function
Function
142 /