Oki B410 Maintenance Manual page 169

Oki Data CONFIDENTIAL
c) Q-Server
Q-server is an application to process the print data.
The Q-server of this system supports multiple file servers. In addition, it offers multiple print
servers to one file server.
Print Server Name
Printer Name
File Server Name
Password for File
Servers
Job Polling Rate
Tree
Context
43984801TH Rev.1
Item Factory Default
Olxxxxxx
MLxxxxxx
Etherxxxxxx
(Print Server
Name)-prn1
NULL
NULL
4
NULL
NULL
Appendix D Network Interface
Contents
The last 3 bytes of MAC address are set in xxxxxx
of the default. By this setting, the default is not
overlapped with other printers manufactured by OKI
DATA.
Overseas: Olxxxxxx
Japan: Mlxxxxxx
OEM: Etherxxxxxx
Print Server Name has to be set in NetWare Server
in advance by the Novell tool.
As for the default, "-prn1" is added to the last of the
above Print Server Name.
Print Server Name has to be set in NetWare Server
in advance by the Novell tool.
(However, it seems that Netware can be operated if
it is omitted.)
Enter a name of File Server to be connected. File
Server is the File Server where each setting value
is specified by the Novell tool.
It is not necessary to input this value, and if this
column is blank, SoftNIC can find out Print Server
to be automatically printed and connect to it.
Enter a password when connecting to File Server. A
password has be connected to the NetWare server
in advance by the Novell tool. It is not necessary
to input this value, and if this column is blank, the
password is not used when connecting to the File
Server. In such a case, the password has to be set
in the File Server.
Specify an interval to check whether a job occurs.
It is not necessary to input this value, and if this
value is blank, the default, "4 seconds" is enabled.
Enter a name of Tree to be connected. Tree has
to be set in the NetWare server in advance by the
Novell tool.
Enter a name of Context to be connected. The
Context has to be set in the NetWare server in
advance by the Novell tool.
169 /