Oki B410 Maintenance Manual page 14

Oki Data CONFIDENTIAL
(8) Paper feeding method
(9) Paper ejecting method
(10) Resolution (Max.)
(11) Input electricity
(12) Electricity consumption
(13) T emperature and Humidity
Power switch
(14) Operating noise In Printing
(15) Consumables Toner cartridge
43984801TH Rev.1
Automatic feeding
Face down (Rear ejecting) / Face up (Front ejecting)
2400 × 600 dots / inch (B410d/B410dn/B420dn)
1200 × 1200 dots / inch (B430d/B430dn)
AC100V ± 10V, 50/60Hz ± 1Hz(B410dn/B430dn)
Up and running: Maximum 800W, Average 450W (25°C)
Ready and waiting: Average 0W (25°C)
Power-saving mode: (Without option) Under 6W
Tenperature
Up and
10~32
running
0~43
off
Keeping
- 10~43
Temperature (°C)
32
28
10
Ready and waiting : Rage A based on JIS Z9831, Average below 53dBA for SLOW.
At power save
Image drum
Cartridge
(With option)
Humidity
20~80%RH (Relative Humidity) No condensation.
However, Maximum temperature of wet ball should
be 25°C.
10~90%RH (Relative Temperature) No
condensation. However, Maximum temperature of
wet ball should be 26.8°C.
10~90%RH (Relative Humidity) No condensation.
However, Maximum temperature of wet ball should
be 26.8°C.
Up and running
Relative humidity (%)
20 80
: R age A based on JIS Z9831, Average below 53dBA for SLOW.
: No sound (Background level)
: A pprox. 3,500 piece /Approx. ,000 piece/Approx. 10,000
piece(A4 ISO/IEC 1952 Continuous printing as
printing paten. But, except the 1st Toner cartridge)
: Approx. 25,000 piece (Continuously single-side printing of A4)
: Approx. 20,000 piece (Single-side 3 pages/job) At Power save off.
Approx. 12,000 piece (Single-side 1 page/job) At Power save off.
Approx. ,000 piece (Single-side 1 page/job) At Power save on
(Minimum value).
1. CONFIGURATION
Maximum W
14 /