Oki B410 Maintenance Manual page 83

Oki Data CONFIDENTIAL
ENGINE
TEST
ENGINE RESET
INITIALIZING
ONLINE
43984801TH Rev.1
Press Key
Press Key "MENU▲" "MENU▼" and move
"SETTING"
EP TEST
OFF
PRT DUTY
1/1
MODE
00
Reset the following counters that are used in engine part.
・ Drum Total Counter
Reset, select key
・ Drum Counter
"SETTING"
・ Printing Total Page Counter
But, Printing Total Page Counter is only reset for the count under
500. (This limit is not compliant in the case of reset for PJL
Command)printing stops.
OFF
PAPER
Select by
Key "SETTING"
CONNECT
and press key
"MENU▲"
"MENU▼"
1/1
Select by 1/10
Key "SETTING"
1/20
and press key
1/50
"MENU▲"
"MENU▼"
00
Select by 01
Key "SETTING"
02
and press key
~
"MENU▲"
FD
"MENU▼"
FE
FF
4. ADJUSTMENT
In this printer, this setting is not used.
Set Duty that is used for Motor Accelerating Test in the factory.
Setting as 1/n means that after 1 piece of paper printing, it makes
the engine idles away for n-1 piece of paper amount.
The setting is irrevocable because it is used for engine debug
mode.
If set it out of default (00), the printing stops.
83 /