Oki B410 Maintenance Manual page 141

Oki Data CONFIDENTIAL
(7) Interface Parameter Setting
This is a procedure to perform on the operator panel of the printer (B420/ B430/ B440 series).
In the setting of B410 series, use "Printer Menu Setup Tool".
By pressin the "Enter" key after selecting a display content of the operator panel with the "Menu
or "Menu
The setting is not changed even if turning of the printer.
By pressing the "Online key", the printer exits the menu setting mode, and returns to the offline status.
Online
Press the "Menu
Centronics Menu
Press the "Enter" key.
Centronics
Enable
Press the "Menu
Bidirectional Centronics
Enable
Press the "Menu
ECP
Enable
Press the "Menu
43984801TH Rev.1
" key, the following setting is available.
" key 9 times.
[Centronics Menu] is shown on the display.
Items
*
Enable
Disable
Factory Default: Enable
" key.
Items
*
Enable
Disable
Factory Default: Enable
" key.
Items
*
Enable
Disable
Factory Default: Enable
" key.
Appendix A Centronics Parallel Interface
Enable/ Disable of Centronics I/F
Display
Enable
Disable
Data Transfer Direction
Display
Bi-directional data transfer
Unidirectional data transfer
Enable/ Disable of ECP Mode
Display
Enable
Disable
Function
Function
Function
" key
141 /