Oki B410 Maintenance Manual page 108

Oki Data CONFIDENTIAL
③ Paper Size Error
• Is the paper which is specified size used?
• No
• Yes
• No
• Yes
• No
• Yes
43984801TH Rev.1
Use a specified-size paper.
Does the entrance sensor lever work normally? (It moves freely by touching.)
Replace the entrance sensor lever, or clean the high-voltage power/ the entrance
sensor of the sensor board.
Does the write sensor lever work appropriately? (It moves freely by touching.)
Replace the write sensor lever, or clean the high-voltage power/ the entrance sensor
of the sensor board.
Replace the high-voltage power/ the entrance sensor of the sensor board.
Toner sensor
Entrance sensor
Pick-up roller
The sensors mounted on High voltage power board are
Writing sensor, Entrance sensor, and Toner sensor.
Paper ejection roller
Ejection sensor
Heat roller
Transfer roller
Write sensor
Paper-end sensor
Feed roller
6. Procedures for Repairing
Regist roller
108 /