Oki B410 Maintenance Manual page 167

Oki Data CONFIDENTIAL
c) FTP
FTP is an application to process the print data.
The FTP of this system supports multiple clients. Also, it provides multiple connections to each
client.
The number of connection
clients
d) Telnet
Telnet is an application to perform the menu reference/ change of the network / printer.
Telnet of this system supports simultaneous connection of multiple clients which are individual
users.
The number of connection
clients
Terminal mode
The number of columns
The number of lines
Idling time completion
e) HTTP
HTTP is an application to perform reference/ change of the network/ printer.
HTTP of this system supports simultaneous connection of multiple clients which are individual
users. In addition, it offers multiple connections to one client.
HTTP version
f) SNMP
SNMP is an application to perform reference/ change of the network/ printer.
SNMP of this system supports simultaneous connection of multiple clients which are individual
users. In addition, it offers multiple connections to one client.
43984801TH Rev.1
Item Factory Default Setting Range
Item Factory Default Setting Range
VT-100
80 columns
25 lines
300 seconds
Item Factory Default Setting Range
1.0
Appendix D Network Interface
1 to 8 clients It shows the number of simultaneous
connectable clients. Up to 8clients can
be connected at the same time.
1 client It shows the number of simultaneous
connectable clients
VT-100 It shows the control mode of the
connection client terminal. VT-100 is
only support terminal mode.
80 columns It shows the number of digits of
the connection client terminal. The
supported digit number is fixed to 80.
25 lines It shows the number of digits of
the connection client terminal. The
supported digit number is fixed to 25.
60 to 7200 It shows the idling time completion of
seconds connection client.
1.0 It shows the version of HTTP in
executing.
Contents
Contents
.
Contents
167 /