Rear-Cover-Assy - Oki B410 Maintenance Manual

Oki Data CONFIDENTIAL

3.3.15 Rear-Cover-Assy

(1) Open Rear-Cover-Assy.
(2) Open Stacker-Cover-Assy.
(3) Remove Cover-Side-R. Remove Cover-Side-L. (Refer to 3.3.3/3.3.4)
(4) Remove Cover-Face Up-A ① from the supporting point with opening the right side supporting point part
of Rear-Cover-Assy.
(5) Remove the 2 screws (Black) ② . Remove Plate-Solenoid ③ .
(6) Remove Solenoid ❹ from Rear-Cover-Assy ❺ .
Because the plunger is not fixed, beware of not to drop or lose it.
(7) Remove Rear-Cover-Assy by bowing down the supporting point part of Rear-Cover-Assy to the inner
side.
(8) Installing is performed by the inverse procedure with removing.
(Note on removing / installing)
1. Beware of not to touch the DC motor inattentively (Do not rotate motor).
2. About the installing of Rear-Cover-Assy ❺ , remove Cover-Face Up-A ① , make the supporting
point part to a bowed situation and then perform installing.
43984801TH Rev.1
Plunger
Supprting point
3. Parts replacement
53 /