Assembling The Water Pump - Yamaha YZF-R1P Service Manual

WATER PUMP
EAS00475

ASSEMBLING THE WATER PUMP

1. Install:
• oil seal
New
(into the water pump housing 2)
NOTE:
_
• Before installing the oil seal, apply tap water
or coolant onto its out surface.
• Install the oil seal with a socket that matches
its outside diameter.
2. Install:
• water pump seal
CAUTION:
_
Never lubricate the water pump seal sur-
face with oil or grease.
NOTE:
_
• Install the water pump seal with the special
tools.
• Before installing the water pump seal, apply
Yamaha bond No.1215 or Quick Gasket 2
to the water pump housing 3.
Mechanical seal installer 4
YM-33221
Middle driven shaft bearing driver 5
YM-4058-1
Quick Gasket
ACC-11001-05-01
È Push down.
3. Install:
• rubber damper
• rubber damper holder
NOTE:
_
Before installing the rubber damper, apply tap
water or coolant onto its outer surface.
6 - 15
COOL
1
1
New
®
1
New
2
New