Checking The Engine Oil Level - Yamaha YZF-R1P Service Manual

Hide thumbs Also See for YZF-R1P:
Table of Contents

Advertisement

MEASURING THE COMPRESSION PRESSURE/

CHECKING THE ENGINE OIL LEVEL

30
40
50
É
0
5
10
7. Install:
• spark plug
• ignition coil
8. Install:
• rubber baffle
• ignition coil plates
• air filter case
• fuel tank
• rider seat
EAS00069
CHECKING THE ENGINE OIL LEVEL
1. Stand the motorcycle on a level surface.
NOTE:
_
• Place the motorcycle on a suitable stand.
• Make sure the motorcycle is upright.
2. Start the engine, warm it up for several min-
3. Check:
• engine oil level
60 ˚F
È
NOTE:
_
Before checking the engine oil level, wait a few
15 ˚C
minutes until the oil has settled.
3 - 23
13 Nm (1.3 m · kg, 9.4 ft · lb)
Refer to "AIR FILTER CASE".
Refer to "FUEL TANK".
Refer to "SEATS".
utes, and then turn it off.
The engine oil level should be between the
minimum level mark a and maximum level
mark b.
Below the minimum level mark → Add the
recommended engine oil to the proper level.
Recommended oil
At 5 °C (40 °F) or higher È
Yamalube 4 (20W40) or
SAE 20W40 type SE motor oil
At 15 °C (60 °F) or lower É
Yamalube 4 (10W30) or
SAE 10W30 type SE motor oil
CHK
ADJ

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Yzf-r1pcR1 2003Yzf-r1p 2001-2003Yzf-r1pc 2001-2003Yzf-r1p 2002Yzf-r1pc 2002

Table of Contents