Yamaha YZF-R1P Service Manual page 97

GENERAL MAINTENANCE AND LUBRICATION CHART
No. ITEM
Control cables • Apply Yamaha chain and cable lube or
7 *
(See page 3-57.) engine oil SAE 10W-30 thoroughly.
• Check bearing assembly for looseness.
Swingarm pivot
• Moderately repack with lithium-soap-based
8 * bearing
grease every 16,000 mi (25,000 km) or
(See page 4-71.)
24 months.
Rear suspension
• Check operation.
9 * link pivots
• Correct if necessary.
(See page 4-71.)
Shock absorber
• Check operation and for oil leakage.
10 * assembly
• Replace if necessary.
(See page 4-68.)
Front fork • Check operation and for oil leakage.
11 *
(See page 3-48.) • Repair if necessary.
• Check bearing assembly for looseness.
Steering bearings • Moderately repack with lithium-soap-based
12 *
(See page 3-45.) grease every 16,000 mi (25,000 km) or
24 months.
Brake and clutch
• Apply chain lube or lithium-soap-based
13 lever pivot shafts
grease lightly.
(See page 3-57.)
Brake pedal • Apply chain lube or lithium-soap-based
14
(See page 3-57.) grease lightly.
• Check chain slack/alignment condition.
Drive chain • Adjust and lubricate chain with Yamaha chain
15 *
(See page 3-43.) and cable lube or engine oil SAE 10W-30
thoroughly.
Wheel bearings
16 * • Check bearings for smooth operation.
(See page 4-3.)
• Check operation.
Sidestand pivot
17 * • Apply chain lube or lithium-soap-based
(See page 3-57.)
grease lightly.
Sidestand switch
18 * • Check and clean or replace if necessary.
(See page 8-4.)
Chassis fasteners • Check all chassis fittings and fasteners.
19 *
(See page 2-21.) • Correct if necessary.
* Since these items require special tools, data and technical skills, have a Yamaha dealer perform the service.
NOTE:
From 24,000 mi (37,000 km) or 36 months, repeat the maintenance intervals starting from 4,000 mi
(7,000 km) or 6 months.
NOTE:
G
Air filter
• This model's air filter is equipped with a disposable oil-coated paper element, which must not be
cleaned with compressed air to avoid damaging it.
• The air filter element needs to be replaced more frequently when riding in unusually wet or dusty areas.
G
Hydraulic brake service
• After disassembling the brake master cylinders and calipers, always change the fluid. Regularly
check the brake fluid levels and fill the reservoirs as required.
• Every two years replace the internal components of the brake master cylinders and calipers, and
change the brake fluid.
• Replace the brake hoses every four years and if cracked or damaged.
G
Engine oil type
• Yamalube 4 (20W-40) or engine oil SAE 20W-40 (API SE) for temperatures of 5 °C (40 °F) or above.
• Yamalube 4 (10W-30) or engine oil SAE 10W-30 (API SE) for temperatures of 15 °C (60 °F) or below.
INITIAL
600 mi
ROUTINE
(1,000 km)
1 month
Every 600 mi (1,000 km) or after washing the motorcycle
3 - 2
CHK
ADJ
ODOMETER READINGS
4,000 mi 8,000 mi 12,000 mi
(7,000 km) (13,000 km) (19,000 km)
or or or or
6 months 12 months 18 months
√ √ √ √
√
√
√ √ √
√ √ √
√ √ √
√ √ √ √
√ √ √
or riding in the rain.
√ √ √
√ √ √
√ √ √ √
√ √ √
16,000 mi 20,000 mi
(25,000 km) (31,000 km)
or or
24 months 30 months
√ √
√
Replace.
√
√ √
√ √
√
√
Replace.
√ √
√ √
√ √
√ √
√ √
√ √