Assembling The Crankcase - Yamaha YZF-R1P Service Manual

CRANKCASE
EAS00414

ASSEMBLING THE CRANKCASE

1. Lubricate:
• crankshaft journal bearings
(with the recommended lubricant)
Recommended lubricant
Engine oil
2. Apply:
• sealant
(onto the crankcase mating surfaces)
Quick Gasket
ACC-11001-05-01
NOTE:
_
Do not allow any sealant to come into contact
with the oil gallery or crankshaft journal bear-
ings. Do not apply sealant to within 2 ~ 3 mm
of the crankshaft journal bearings.
3. Install:
• dowel pin
4. Install:
• crankshaft journal lower bearings 1
(into the lower crankcase)
NOTE:
_
• Align the projections a on the crankshaft
journal lower bearings with the notches b in
the lower crankcase.
• Install each crankshaft journal lower bearing
in its original place.
5. Set the shift drum assembly and transmis-
sion gears in the neutral position.
5 - 62
ENG
®