Yamaha YZF-R1P Service Manual page 213

FRONT FORK
4. Install:
• dust seal 1
• oil seal clip 2
• oil seal 3
• washer 4
CAUTION:
@
Make sure the numbered side of the oil seal
faces out side.
NOTE:
_
• Before installing the oil seal, lubricate its lips
with lithium-soap-based grease.
• Lubricate the outer surface of the inner tube
with fork oil.
• Before installing the oil seal, cover the top of
the front fork leg with a plastic bag to protect
the oil seal during installation.
5. Install:
• oil seal 1
(with the fork seal driver 2)
Fork seal driver
YM-01442
6. Install:
• oil seal clip 1
NOTE:
_
Adjust the oil seal clip so that it fits into the
outer tube's groove.
7. Install:
• dust seal 1
(with the fork seal driver 2)
Fork seal driver
YM-01442
4 - 52
CHAS