Fujitsu fi-6000NS Operator's Manual page 256

HINT
If document jams or multifeed errors occur frequently, try the following procedures.
1. Align the edges of the document sheets.
2. Lightly grip the ends of the document stack in both hands and flex it back forth, as
shown below.
⇒
The edge of the document stack that will be loaded into the ADF paper chute should be
skewed.
230
•
Although no error message is displayed, document pages may remain in
the ADF even after scanning is completed or cancelled. Follow the
procedure below to remove any such pages from the ADF.
1. Remove all documents from the ADF paper chute.
2. Push the ADF release button, then hold both sides of the top cover
and lift it open.
3. Remove the remaining documents.
4. Close the top cover.
•
If document pages become blocked while scanning, check the scanned
data. If documents become blocked whilst being fed into the scanner,
document pages which could not be scanned correctly may remain in the
ADF. In this case, delete all pages not correctly scanned using the
[Delete] button on the "Scan Viewer" screen.
For more details about the "Scan Viewer" screen, refer to "4.9.4 Deleting
a Scanned Page" (page 204).
ront side