Fujitsu fi-6000NS Operator's Manual page 111

4. Enter an e-mail address to which the alert notification will be sent.
This may be up to 255 characters long. One of the following e-mail address formats must be
used:
•
XXXXXXX@IP_address
•
XXXXXXX@Host_name
•
XXXXXXX@Domain_name
XXXXXXX
IP_address
Host_name
Domain_name
5. To confirm that the entered e-mail address is valid, press the [Test] button.
Check that the test mail successfully arrives at the expected e-mail address.
6. Press the [OK] button.
⇒
The destination for alert notifications is set.
3.6 Using the Network Settings Menus
Comprised of alphanumerics, hyphens (-), periods (.) and
underscores (_).
Comprised of numbers separated by periods (.).
IP addresses within the following ranges may be used:
1.0.0.1 - 126.255.255.254
128.0.0.1 - 191.255.255.254
192.0.0.1 - 223.255.255.254
Comprised of alphanumerics and hyphens (-) only. Initial character
may not be a hyphen.
Name elements comprised of alphanumerics and hyphens (-) are
separated by periods (.).
Each name element may contain up to 63 characters, and only
alphabetic characters may be used for the last element.
Network Scanner fi-6000NS Operator's Guide
3
85