Fujitsu fi-6000NS Operator's Manual page 203

•
If the [Auto] paper size is selected, the [600dpi] resolution may not be
HINT
selected.
•
If a paper size other than [Auto] is selected and only one side of the
documents is scanned, artwork on the reverse side of the paper may
bleed through onto the front side scan. If this happens, blank pages may
not be recognized as such, and thus may not be skipped by the "Skip
Blank Page" function. For more details, refer to "4.7.12 Blank Page Skip"
(page 194).
•
When [Custom] settings are used, any paper size for the scan data can
be specified.
1. Press the [Custom] button.
⇒
The "Custom Paper Size" screen appears.
2. Enter the paper size for the scan data.
The size ranges that can be set are:
Width: 2in to 8.5in (50.8mm to 216mm)
Height: 2.91in to 14in (74mm to 355.6mm)
If the height is 14in or longer, the paper size setting must be set to
allow long pages. For more details, refer to "Long Page Mode" (page
178).
3. Press the [OK] button.
⇒
The custom paper size is set.
4.7 Setting the Scan Options
Network Scanner fi-6000NS Operator's Guide
4
177