Fujitsu fi-6000NS Operator's Manual page 262

When checking the network connection status of a server with an FQDN, the following results are
possible.
Result
"Ping statistics" shows
"Lost=0 (0% loss)"
"Ping request could not find
host xxx.xxx.xxx. Please check
the name and try again."
"Ping statistics" shows
"Lost=4 (100% loss)"
"Ping statistics" shows
"Lost=N (1 to 99% loss)"
"Hardware error"
236
Connection
status
OK None
NG Check that the ping target server name is correct.
Check that the DNS server or WINS server settings
are correct.
If the ping target server name is correct, refer to
"Failure to connect to a remote computer using its
server name" (page 244) for further solutions.
NG
Check that the ping target server name is correct.
In "3.6.11 Checking the Network Operating Status"
(page 89), change the [Link Speed/Duplex Mode]
from "Auto-Negotiation" to a fixed mode.
NG There may be a quality problem with the LAN
cable. Replace the LAN cable and try again.
In "3.6.11 Checking the Network Operating Status"
(page 89), change the [Link Speed/Duplex Mode]
from "Auto-Negotiation" to a fixed mode.
NG The LAN cable may have become disconnected
during the Ping test. Check the status of the LAN
cable and try again.
Action