Logging In - Fujitsu fi-6000NS Operator's Manual

3.4.2 Logging In

ATTENTION
HINT
1. Specify the scanner name as a URL in the web browser's location bar.
For example, when the scanner name is "SCAN001":
http://SCAN001/
An IP address can be specified instead of a scanner name for the URL.
If the IP address is xxx.xxx.xxx.xxx, the specified URL is
http://xxx.xxx.xxx.xxx/.
⇒
The "Login" screen appears.
32
•
If the normal screen display does not appear, wait for a few minutes and
try again. If the problem still occurs, contact your FUJITSU scanner dealer
or an authorized FUJITSU scanner service provider.
•
If changes are made to settings, such as IP address settings, when buffer
jobs are already queued, these jobs may not be processed normally. In
such cases, wait for all buffer jobs to be processed before changing any
settings.
•
If the [Cancel] button is pressed repeatedly in succession, "The page
cannot be displayed" message may appear on the screen. In this case,
wait for a few minutes and try again.
•
The user name and initial password for the administrator are as follows:
User Name: admin
Password: password
•
Only one administrator or user can login to the scanner at any one time.
•
Timeout time is 20 minutes (fixed). The timeout time is extended by a
further 20 minutes for the following:
• when a tab on the top menu or left side menu is pressed
• when the [OK] button is pressed