Checking The Mail Server By Sending A Test Mail - Fujitsu fi-6000NS Operator's Manual

■ Checking the mail server by sending a test mail

On the "Alert Notification" screen, press the [Test] button to check if an e-mail can be sent to the
specified destination.
After pressing the [Test] button, a message dialog such as the following is displayed:
The following outcomes are possible.
Message
Testing...
240
Connection
status
OK If no error message appears and the "testing"
indicator disappears, the test mail was sent
successfully to the mail server.
Check that the alert notification e-mail has arrived
at the specified destination. If the alert notification
e-mail has not arrived at the expected destination,
check that the part of thee-mail address before the
"@" has been entered correctly.
Action