Failure To Cannot The Scanner Using A Web Browser - Fujitsu fi-6000NS Operator's Manual

■ Failure to connect to a remote computer using its server
name
If connection to a remote computer using a FQDN is not possible even after the server name has
been checked using a ping test, try the following steps:
No.
1 Same as in "Failure to connect to a remote
computer using its IP address" (page 242).
2 The scanner's DNS server or WINS server
settings are invalid.
3 The DNS server or WINS server is not
functioning normally, or there is an error with
the DNS or WINS server network connection.

6.3.3 Failure to cannot the Scanner using a Web Browser

If the "Login" screen does not appear after the scanner's URL is specified in the web browser, try
the following steps:
No.
1 Same as in "Failure to connect to a remote
computer using its IP address" (page 242).
2 The DNS server or WINS server is not
functioning normally, or the scanner name has
not been registered in the DHCP or WINS
server.
3 A misconfigured firewall between the web
browser and the scanner is denying access.
244
Problem
Problem
Action
Check if a network connection is possible by
trying the same solution for "Failure to
connect to a remote computer using its IP
address" (page 242).
Check that the DNS and WINS server settings
are correct.
Ping the DNS and WINS servers to check they
are functioning normally.
If the DNS or WINS server is not functioning,
request the network administrator to check its
status.
Action
Check if a network connection is possible by
trying the same solution for "Failure to
connect to a remote computer using its IP
address" (page 242).
For the URL in the web browser, use the
following IP address to check the connection.
Example: http://192.168.1.200/
If it is possible to connect the scanner from the
web with a specified IP address, specify the
scanner's IP address in the DNS or WINS
server. Also, check the DNS or WINS server
settings on the web browser terminal.
If there is a firewall between the computer
running the web browser and the scanner,
check that it settings are not preventing access.